 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||||||
 |
|
||||||||||||||
 |
 |
 |
|
||||||||||||
 |
|
||||||||||||||
 |
 |
 |
 |
 |
 |
|
|||||||||
 |
|
||||||||||||||
 |
Home > Store > Products > Timer > Change the Timer's Battery |  |
||
 |
||||
| How to change the battery for your new Timer | ||||||||||||||||||
| These
directions refer to the new attachable/detachable Timer only. |
||||||||||||||||||
Your new attachable/detachable Timer is battery-driven. You may need to change out the battery after its useful life is over. |
 |
 |
||||||||||||||||
Your Timer "splits" apart. Firmly grasp the timer top and bottom. Gently pull the timer apart - it is magnetized and splits at the unit's "seam" (where the halves meet on either side of the StackMat). Remove the StackMat and set aside. |
 |
 |
||||||||||||||||
The battery slot is in the Timer top (see red circle diagram 2). Battery required: 3 volt Lithium battery.*** Replace battery and reposition the battery slot door (tab into slot) and snap shut.
|
 |
 |
||||||||||||||||
Line up the Timer bottom, StackMat, and Timer top. Match the magnetized pads on the timer top and bottom over the StackMat and snap the Timer back together. You are all set to keep track of your times once more. |
 |
 |
||||||||||||||||
|
||||||||||||||||||
 |
|
Home | The Sport | Stacker News | Stacking Events | About Us | Speed Stacks Store |
|
| |
|
| Speed Stacks Japan info@speedstacks.jp Copyright© 2000-2007 Speed Stacks Japan / Speed Stacks, Inc. All rights reserved. |
|